Asphalt Industry Glossary of Terms
This is an alphabetical report on the terms and points commonly used in the asphalt industry. A
Absolute Viscosity A measure of the viscosity of concrete with respect to time, measured in poises, conducted at 60В°C (140В°F). The test method utilizes a partial vacuum to induce flow in the viscometer.
Machines used for distributing aggregate equally at a uniform rate on a area.
Aggregate Storage Bins that store the required aggregate sizes and supply them to the appliance in Containers
substantially similar proportions as are required inside the finished blend. Aggregate Trucks
Trucks pre-loaded with hydraulic lifts to eliminate the aggregate into the spreader or storage area.
A hard inert mineral material, such as small, crushed rock, slag, or perhaps crushed stone, used in sidewalk applications either by itself or perhaps for blending with concrete.
Internal places in a compacted mix surrounded by asphalt-coated contaminants, expressed as being a percentage simply by volume of the whole compacted mixture.
A dark brown to black cementitious material where the predominating matters are bitumens, which occur in nature or are obtained in petroleum processing. Asphalt is actually a constituent in varying ratios of most crude petroleum and used for introducing, roofing, commercial and other exceptional purposes.
Interconnected cracks creating a series of tiny blocks similar to an alligator's skin or perhaps chicken-wire, and caused by increased deflection in the surface above unstable subgrade or lower courses of the pavement.
The application of sprayed asphalt coatings certainly not involving the make use of aggregates.
Asphalt cement that is classified based on the Standard Specs for Performance Graded Concrete Binder, AASHTO Designation MP1. It can be possibly unmodified or modified concrete cement, provided that it conforms with the requirements.
A mixture of asphalt binder and aggregate carefully mixed and compacted into a mass.
A truck or a movie trailer having a great insulated reservoir, heating system and distribution system. The distributor applies concrete to a surface area at a uniform charge.
An emulsion of asphalt binder and water made up of a small amount of an emulsifying agent. Emulsified concrete droplets can be of either the anionic (negative charge), cationic (positive charge) or nonionic (neutral).
Concrete Emulsion Mix (Cold)
A variety of unheated vitamin aggregate and emulsified (or cutback) concrete binder. It might be plant-mixed or mixed in-place.
Asphalt Emulsion Mix (Warm)
A mixture of concrete emulsion and mineral mixture usually ready in a conventional hot combine asphalt plant at a temperature lower than 95В°C (200В°F). It is spread and condensed at a temperature previously mentioned 65В°C (150В°F).
Asphalt Emulsion Slurry Seal off
A mixture of slow-setting emulsified concrete, fine combination, and mineral filler having a slurry persistence
Asphalt Leveling Course
A course of sizzling mix concrete of changing thickness utilized to eliminate irregularities in the contour of an existing surface just before placing the following course.
Asphalt Pavement Structure
A tarmac structure that is designed and built so that every courses above the subgrade are asphalt concrete floor (Full-Depth Asphalt Pavement).
Streets consisting of a area course of asphalt concrete more than supporting classes such as asphalt concrete angles, crushed rock, slag, tiny rocks, Portland Cement Concrete (PCC), brick, or block pavement.
Asphalt Prime Coat
A credit card applicatoin of concrete primer to a absorbent surface area. It is accustomed to prepare a great...